

MOTOR OIL RACING MAX POWER MOTO 10W50 It is a 100% synthetic Racing oil of the highest quality, with the addition of the latest generation esters, specifically formulated for use on engines specifically designed to work with this viscosity. This Prorace Engine Oil is able to perfectly lubricate the engine even in super-heavy conditions.
 Due to its peculiar properties, the oil is qualitatively at the top of the ranking of Racing lubricants.
- 
XPT Technology
XPT Technology is a highly technological formulation that includes two important
characteristics:- guarantees unparalleled protection even in extremely demanding conditions thanks to the resistance of the lubricating film which is 4-5 times greater than other conventional lubricants
 - It ensures maximum engine cleanliness, which is essential to prevent even partial clogging of the oil passages. Especially in modern engines, where tolerances and oil passages are increasingly tight, it is essential to keep them perfectly clean to avoid improper lubrication, which can cause engine damage or premature wear.
 
All of this translates into the following advantages:
- higher torque values at all rotation speeds - increased compression values
 - maximum protection of mechanical parts
 - Smoother, quieter, and jam-free gear changes
 - More immediate start-ups thanks to magnetized lubrication on all metal surfaces
 - high protection for engine gaskets and oil seals
 - reduces oil consumption, smoke and noise
 - protection from friction, heat, wear and thermal breakdown
 - the antioxidant additives present keep the oil clean for a long time
 - maximum protection against rust deposits and sludge
 - reduction in fuel consumption of up to 10%
 - lubricant heavily enriched with XPT technology (xtreme protection technology) which has a lubricating film resistance capacity 4-5 times higher than conventional oils
 - composed of high quality fully synthetic bases and special additives that give the product high engine protection and optimize the functioning of mechanical parts even in severe operating conditions
 
 
Property
 MOTOR OIL RACING MAX POWER MOTO 10W50 ensures excellent shear resistance, keeping the protective film always in excellent critical conditions, excellent detergency, maximum protection of the parts, maximum acceleration speed.
We recommend the following replacement intervals, depending on the state of wear of the engine, the preparation and the operating temperatures:
 - mileage between 400 and 800 km of track 
- engine use between 2 and 8 hours in track use or extreme use
 - from 5000 km to the manufacturer's recommended mileage on standard engines or those slightly tuned for sporty road use.
Skimping on lubricant is the worst thing you can do for your motorcycle. Lubricant deterioration can be caused by the lubricant itself, but also by fuel contamination that "leaks" from cylinder heads and pistons during use, by condensation in the engine after use, and by winter storage.
It is in fact advisable to change the oil, even if little used, after periods of inactivity exceeding 12 months.
API: SN SAE: 10W50 JASO: MA2
                                      Mostra di più